X-keys® Key Blockers
Key blockers take the place of any single key on an X-keys XK series device and leave a flat surface at case top height for a professionally finished look. These key blockers friction fit into the XK series deck and may be removed or swapped with keycaps to modify or update a key configuration.
We recommend removing the key plungers on your XK series X-keys before applying the key blockers. Please see this instruction sheet. Instructions for Key Plunger Removal
We also offer pliers for key plunger removal here.
Please note: these are for XK and XKE series X-keys only. We also have key blockers to fit our Classic X-keys with the Cherry MX switch. Please call us to order the MX style blockers.
Set of 10 key blockers
X-keys Light Pipe Blockers
For developers or serious techie X-keys users. Replace any key on an X-keys with one of these to turn the backlight LED into a bright indicator. Use the red, blue, or both LEDs as indicators. Set or change intensity levels. Use custom printing on the light pipe blocker to label the indicators.
Key plungers must be removed from the X-keys to make room for the light pipes and the blockers must be glued down or the elastomeric Installation instructions.
Please note: these are for XK and XKE series X-keys only. Contact us for a quote at: firstname.lastname@example.org
Set of 10 light pipe blockers with a single LED indicator
Set of 10 light pipe blockers with double LED indicators